AirMini HumidX Plus Cartridge

The ResMed AirMini HumidX Plus Catridge is designed to work with the AirFit™ N20 and AirFit™ P10 masks for the AirMini, and cannot be used with any other machine or mask. The HumidX Plus is ideal for extra dry locations to provide added humidication and moisture while breathing.

• HumidX and HumidX Plus cartridges are small heat and moisture exchangers that provide you comfort and effective humidification for most climates and sleep environments. Cartridges should be replaced after 30 days of use and are not suitable for washing.

  HumidX is ResMed’s standard waterless humidification system, suitable for most climates. HumidX Plus is intended for use in dry and high altitude environments where humidity is low (e.g. airplane cabins).

Specs/Technical Features:

• • Small Enough to Fit Anywhere
  • Needs No Distilled Water
  • Not Bulky or Messy
  • Compatible With the AirFit™ N20 and the AirFit™ P10
  • One Cartridge Lasts 30 Days

  Small Enough to Fit Almost Anywhere

  Wherever your travels take you, you’ll be able to bring your HumidX with you. These slim cartridges are designed to fit into a special slot on the short tube of the AirMini version of the AirFit™ N20 and the AirFit™ P10 masks. Each cartridge is small enough that it could easily fit inside of your pocket, and you should only need to bring one with you for most trips.

  Needs No Distilled Water

  When you’re on the road, trying to find distilled water for your humidifier can be a pain. Travel-sized bottles can be really expensive, and gallons of distilled water can be difficult to travel with. The HumidX eliminates the need to have distilled water on hand and doesn’t require any power or batteries to work. Just install it in the short tube of a compatible mask and breathe. That’s all you need to do!

  Not Bulky or Messy

  If you’ve ever forgotten to empty your humidifier chamber before packing up your machine, you know the mess it can create, potentially damaging your machine in the process. With the HumidX, you won’t need to worry about making room for your humidifier in your luggage as it’s not bulky or messy, and it’s designed to work with one of the most portable CPAP machines in the world.

  Compatible With the AirFit™ N20 and the AirFit™ P10

  It’s important to remember that the HumidX is only compatible with the AirMini versions of these masks, and isn’t available for use with any other mask or machine. If you buy an AirFit™ P10 or N20 for use with another machine, the HumidX will not be compatible—it’s designed to work with only the AirMini and its family of masks. Please Note: The AirFit™ F20, AirTouch™ F20, and the AirFit™ F30 will not work with the HumidX despite being compatible with the AirMini.

  Don’t Run Out! One Cartridge Lasts 30 Days

  One HumidX cartridge is good for 30 nights of use. They’re not widely available in stores. A night without humidification can mean a dry throat and painful sinuses, so stock up now, and don’t risk running out

Tips for Assembly & Disassembly:

• Assembly: To assemble the HumidX™ device, gently pull apart the bulbous connection point on the CPAP tube. With the blue base pointed downward, secure the unit on the end of the connection. Then, connect the short tube pieces together and lock into place.
• Disassembly: To disassemble the HumidX™ device, twist and disconnect the bulbous connection on the hose. Remove the HumidX™ after 30 days and replace with a fresh unit.